Order Online 24 hours a day, 7 days a week, 365 days a year |
|
Guitar Adoptions 
Acoustic Pickups B-Band B-Band A2
Acoustic Pickups B-Band B-Band A2
For users, the Core99 has been vital for their performance. Further, significant, changes and updates have been made to enhance this performance - the new A2 is the better result.
The two input A2 preamp allows for an UST / AST combination: a new way for all of instrument's nuances to be reproduced, making the sound more alive. This system gives the player more freedom at high sound levels while retaining all the qualities of the former UST / sound-hole condenser mic system.
The B-Band UST / AST are accessed separately with the use of a standard 1/4" stereo cable. Both outputs are compatible with virtually all outboard equipment inputs.
The A2's UST channel has a unique contour filter for upper register tone enhancement. Inside there is a DIL-switch for switching a high frequency (HF) enhancer on or off. When the switch is in the off position, frequency response is flat. When on, the HF enhancer gives a mild boost to the highs.
The A2's preamp second channel will, if preferred, accept a sound-hole condenser microphone or magnetic pickup as an alternative to the AST. There is DIL-switches to turn on bias voltage for the mic, to turn on a highpass filter for microphone feedback reduction, and to lower the gain from 24 dB down to 0 dB.
The A2 kit provides a high quality endpin jack, all mounting hardware, 9-volt battery clip and wire harness.
B-Band Condenser Microphone can be used instead of AST on A2 preamp's 2nd channel.
Order Code:
AG-MIC
A2 Features:
Two input and output channels: Channel 1 - UST or AST. Channel 2 - AST or sound-hole condenser microphone or magnetic pickup
On/off-switchable treble enhancer at Ch 1
On/off-switchable high-pass filter at Ch 2 (-6 dB/oct; 500 Hz)
On/off-switchable mic bias (phantom) voltage at Ch 2
High gain / low gain switch at Ch 2
Battery life about 400 hours
A2 Specifications:
Frequency response: 50 Hz ... >> 20 kHz on both channels
Low-cut slope: -6 dB/oct on both channels
Ch 1 voltage gain: +18 dB
Ch 2 voltage gain: +24 dB
Ch 1 input impedance: 50 MOhm || < 10 pF
Ch 2 input impedance: 20 MOhm (2.2 with mic phantom on)
Output impedance: 150 Ohm on both channels
Nominal output level: -10 dB ref. 775 mV r.m.s. on both channels
Mic bias voltage: 9 V through 2.2 KOhm
Preset treble enhancer boost: +3 dB @ 6,3 KHz; +5 dB @ 14 KHz (when on)
Power supply: 9 V battery (not included)
Current consumption: 1.5 mA typical (2 mA with mic)
Weight (complete with accessories): 49 g
Dimensions: W 32 mm, H 18 mm, L 82 mm (incl. jack)
The two input A2 preamp allows for an UST / AST combination: a new way for all of instrument's nuances to be reproduced, making the sound more alive. This system gives the player more freedom at high sound levels while retaining all the qualities of the former UST / sound-hole condenser mic system.
The B-Band UST / AST are accessed separately with the use of a standard 1/4" stereo cable. Both outputs are compatible with virtually all outboard equipment inputs.
The A2's UST channel has a unique contour filter for upper register tone enhancement. Inside there is a DIL-switch for switching a high frequency (HF) enhancer on or off. When the switch is in the off position, frequency response is flat. When on, the HF enhancer gives a mild boost to the highs.
The A2's preamp second channel will, if preferred, accept a sound-hole condenser microphone or magnetic pickup as an alternative to the AST. There is DIL-switches to turn on bias voltage for the mic, to turn on a highpass filter for microphone feedback reduction, and to lower the gain from 24 dB down to 0 dB.
The A2 kit provides a high quality endpin jack, all mounting hardware, 9-volt battery clip and wire harness.
B-Band Condenser Microphone can be used instead of AST on A2 preamp's 2nd channel.
Order Code:
AG-MIC
A2 Features:
Two input and output channels: Channel 1 - UST or AST. Channel 2 - AST or sound-hole condenser microphone or magnetic pickup
On/off-switchable treble enhancer at Ch 1
On/off-switchable high-pass filter at Ch 2 (-6 dB/oct; 500 Hz)
On/off-switchable mic bias (phantom) voltage at Ch 2
High gain / low gain switch at Ch 2
Battery life about 400 hours
A2 Specifications:
Frequency response: 50 Hz ... >> 20 kHz on both channels
Low-cut slope: -6 dB/oct on both channels
Ch 1 voltage gain: +18 dB
Ch 2 voltage gain: +24 dB
Ch 1 input impedance: 50 MOhm || < 10 pF
Ch 2 input impedance: 20 MOhm (2.2 with mic phantom on)
Output impedance: 150 Ohm on both channels
Nominal output level: -10 dB ref. 775 mV r.m.s. on both channels
Mic bias voltage: 9 V through 2.2 KOhm
Preset treble enhancer boost: +3 dB @ 6,3 KHz; +5 dB @ 14 KHz (when on)
Power supply: 9 V battery (not included)
Current consumption: 1.5 mA typical (2 mA with mic)
Weight (complete with accessories): 49 g
Dimensions: W 32 mm, H 18 mm, L 82 mm (incl. jack)
|
| Customer feedback | |||||||||||||||||||||
|
|||||||||||||||||||||
| Send to friend | |
|
|
| Price Match | |
|
|
Copyright © 2002-2010 Guitar Adoptions
